This product is now sold only through Easy Composites
Carbon Mods products are now sold through our parent company; Easy Composites.
Please click the button below to be taken to the Easy Composites website where you can buy this product, along with a wide range of composite materials, tools and equipment.
NACA ducts were originally designed by NASA as a very low drag air-intake. When properly installed they allow air to be drawn in through vehicle body panels with minimal disturbance to the air flow. NACA ducts are usually used to provide air for engine, brake and cabin cooling and are commonly installed in bonnets and side panels for this purpose.
This Carbon Mods NACA Vent is designed to the an official NACA specification and is therefore guaranteed to match the performance characteristics of that design. Is is flatter in profile than our NACA Ducts making it more suited to venting than to duct attachment.
The vent is manufactured from 1mm of 100% 2/2 twill 3k carbon fibre making it incredible strong and ultra-light weight. The duct has a high gloss finish on the visible surface and a smooth satin finish to allow of effective bonding on the reverse.
Aesthetically, the vent displays the characteristic genuine carbon fibre weave on both surfaces that adds the ultimate in performance styling to your vehicle.
Installing the vent
The NACA vent can be installed in a variety of ways depending upon the application.
In all circumstances, the body panel will need to be cut to allow the vent to sit flush on panel surface. Download and print the template below to enable you to cut the correct shape in the body panel.
Dimensions
Overall Width |
Overall Length |
Overall Depth |
180mm |
200mm |
25mm |
Typically, installation to provide general air-flow to a region will require no more work than to cut the body panel using the template above and bond the vent to the panel using SikaFlex or similar adhesive.
Other installation might involve ducting the airflow once it is inside the vehicle.