Special 'Large' 1sqm version
By popular request, this is a special larger version of our skinning starter kit. Instead of the usual 0.3m x 1m(11.8" x 39.4") peice of carbon fabric, this kit includes full 1sqm (39.4" x 39.4") of fabric.
This Carbon Mods Carbon Fibre Skinning Starter Kit™ contains everything you need to take an original part (made from plastic, metal or any other material), cover it with genuine 2/2 twill carbon fibre and finish it to a high gloss.
Video Guide
Please note the above video relates to the standard size kit, not this special large one. All techniques are the same though.
Skinning a part with carbon fibre will enhance its appearance and greatly increase its strength and is a viable alternative to the more complicated approach of making an all-carbon fibre replacement part where volumes are small (such as one-offs) and cosmetic appearance, rather than weight saving, is the primary objective.
Kit Contents
- 1sqm (1000mm x 1000mm) 2/2 twill 3k dry carbon fibre fabric
- 166g laminating epoxy resin base coat
- 333g epoxy resin top coat
- 250g epoxy hardener
- 35ml polishing compound
- 2 pairs latex gloves, 2 mixing pots, 2 mixing sticks
- 2 x 1" laminating brush
- 120, 240, 400, 800 & 1200 grit full sheets of wet and dry sand paper
- Full instructions
Dimensions
When unrolled the carbon fibre fabric is 1000mm(39.4") wide and 1000mm(39.4") long.
Uses for This Kit
Use this kit to cover a wide range of parts in and around your vehicle, or just about any other item that would look stunning with a genuine carbon fibre finish.
Use this kit to:
- Cover plastic interior mouldings and trim such as centre consoles and door handle mouldings
- Cover plastic exterior mouldings such as spoilers, bumper details etc.
- Cover metal parts such as slam panels
What results can I expect?
All the materials, supplies and techniques supplied as part of the skinning kit are completely capable of producing professional quality, saleable parts. However, like any practical task (such as repairing a scratch or dent on your car or fitting a stereo) perseverance will be required to produce parts of the highest quality. As you gain skill and experience the quality of the parts will increase and the time taken to make them will decrease.
Comprehensive Instructions
As with all Carbon Mods starter kits, the skinning kit is accompanied by comprehensive instructions that take you through the process of skinning your parts from prep all the way to polish.
Click here to download the instructions in PDF format
Please note the above instructions relate to the standard size kit, not this special large kit. All techniques remain the same.
Larger Skinning Projects
In addition to this small skinning kit we also sell a Large Skinning Kit which includes materials for a project that's 1m x 1m (39" x 39"). If that's not enough for your project then we also sell all the individual parts of the kit separately meaning you can buy enough material for any project!
For every 1sqm you want to skin in carbon fibre you'll need approximately:
Carbon Fibre Skinning Starter Kit™ is a trademark of Carbon Mods