Carbon Mods Carbon Fibre Cycle Wings are available in several sizes and styles.
All cycle wings are manufactured from the highest quality 3k 2/2 twill carbon fibre which gives them the true "3D" carbon fibre look. The wings have a high-gloss finish to accentuate the carbon weave.
Recommended uses for this size and style
These Track Style Aero wings have been designed to the same dimensions and specification as our Track Style wings but include the additional aerodynamic bulge to break up the airflow and reduce lift. They are akin in style to the wings included on the Caterham's CSR and should provide similar performance gains.
The cycle wings are designed to be a very close fit to the tyre, significantly reducing the drag caused by air around and under less closely fitted wings. To maintain clearance between the wing and the tyre these wings have a very flat profile with tight radiuses at the edges and minimal wrap. The wings are wide enough to accommodate up to 225 section tyres common in track racing.
A wider version of the same wings are available in our Track Wing Aero wings and similar wings without the Aero bulge are also available in our Track Style wings.
Due to the close fit of the wings to the tyre it is very important to carefully measure the overall diameter of your tyres before ordering. Please see our Cycle wing sizing chart for detailed information on measure your tyres.
Dimensions
| Overall Width |
Overall Length |
Overall Height |
Diameter |
| 226mm |
600mm |
252mm |
610mm |
Overall measurements are the overall width, length and height of the cycle wings when placed on a flat surface.
The diameter is the diameter of the cylinder that the wing"s surface would wrap with NO clearance. This is NOT a measurement of what diameter tyres the wing would suit.
For information on how to use these measurements to find the perfect wing for your vehicle, please see our Cycle Wing Sizing Guide.
Installation
These wings can be fitted onto standard cycle wing brackets but will probably require some modification to the bracket (as the aero profile raises the fixing point of the wing. The wings are commonly attached to the brackets using a flexible adhesive like Sikaflex or Tiger Seal to avoid interrupting the smooth carbon fibre surface.
These Carbon Fibre Cycle Wings are manufactured by Carbon Mods in the UK.