Track Style Carbon Fibre Cycle Wings

Carbon Mods Carbon Fibre Cycle Wings are available in several sizes and styles.

All cycle wings are manufactured from the highest quality 3k 2/2 twill carbon fibre which gives them the true "3D" carbon fibre look. The wings have a high-gloss finish to accentuate the carbon weave.

These Track style wings have been specifically designed to meet the styling and aerodynamic needs of track raced kit-cars.

The cycle wings are designed to be a very close fit to the tyre, significantly reducing the drag caused by air around and under less closely fitted wings. To maintain clearance between the wing and the tyre these wings have a very flat profile with tight radiuses at the edges and minimal wrap;. The wings are wide enough to accommodate up to 225 section tyres common in track racing.

Our Track wing is also available as Track Style Aero and Track Style Aero Narrow with the distinctive Aero bulge to disturb the airflow over the wing and further enhance its aerodynamic characteristics.

Due to the close fit of the wings to the tyre it is very important to carefully measure the overall diameter of your tyres before ordering. Please see our Cycle wing sizing chart for detailed information on measure your tyres.

The diameter is the diameter of the cylinder that the wing's surface would wrap with NO clearance. This is NOT a measurement of what diameter tyres the wing would suit.

For information on how to use these measurements to find the perfect wing for your vehicle, please see our Cycle Wing Sizing Guide.

These wings can be fitted onto standard cycle wing brackets with little or no modification required (other than to set the correct height if necessary). The wings are commonly attached to the brackets using a flexible adhesive like Sikaflex or Tiger Seal to avoid interrupting the smooth carbon fibre surface.

These Carbon Fibre Cycle Wings are manufactured by Carbon Mods in the UK.